Product Introduction

In the testing of materials such as steel, casting, alloys and ores, when purchasing carbon and sulfur analyzers, a practical problem is whether the data repeatability of low-content carbon and sulfur testing can meet daily quality inspection requirements. If the sensitivity of the instrument is insufficient or the test results of different batches fluctuate greatly, the laboratory needs to increase the number of retests, which will affect incoming inspection and production quality judgment.

HUNO R1CS adopts high-frequency induction combustion and infrared detection methods. The sensitivity of carbon and sulfur can reach 0.00001%(0.1 ppm). The repeatability indicators are: carbon 1 ppm or 0.5% relative standard deviation, sulfur 1 ppm or 1.0% relative standard deviation; single analysis time is about 20 - 40 seconds. For material laboratories that need to conduct low-content carbon and sulfur testing, duplicate testing caused by insufficient detection resolution can be reduced.

Carbon Sulphur Analyzer Technical Parameters

Carbon Sulphur Analyzer Standard Configuration

Standard Configuration

Host Machine

Operation Software

Computer

Electronic Balance

Optional Configuration

Dust Collection Device 

Regulated Power Supply 

Printer

Product Features:

1. High-sensitivity detection: The sensitivity of carbon and sulfur can reach 0.1 ppm, which is suitable for low-content carbon and sulfur detection.

2. Fast analysis speed: A single analysis time is about 20 - 40 seconds and can be used for continuous laboratory testing.

3. High-frequency induction combustion: Samples are burned through a high-frequency induction furnace, and then carbon and sulfur content are analyzed by an infrared detection system.

4. The detection range is wide: carbon and sulfur can cover the range of ppm to percent, and the analysis range can be further expanded after changing the sample weighing amount.

5. Suitable for multiple materials: It can be used for carbon and sulfur analysis of solid materials such as ferrous metals, non-ferrous metals, alloys, ores, inorganic materials and ceramics.

6. Support high and low range configuration: High-carbon, low-carbon, high-sulfur, and low-sulfur detection channels can be configured according to testing needs, and single or dual testing is supported.

7. Independent operation of software: The analysis software has certain expansion capabilities to meet the data processing needs of material development and daily testing.

8. The equipment structure is easy to upgrade: the hardware adopts an open design and can be configured and adjusted according to subsequent testing needs.

Product Application:

· Steel and casting material testing

It is used for testing carbon and sulfur content in steel, cast iron and related metal materials, and provides testing data for raw material inspection, pre-furnace quality control and finished product analysis.

· Analysis of alloys and non-ferrous metals

It is suitable for testing the carbon and sulfur content in alloys, non-ferrous metals, rare earth and other materials. It can be used for material development, incoming inspection and composition control during the production process.

· Inspection of ore, ceramics and inorganic materials

For solid materials such as ore, mineral powder, and ceramic powder, the carbon and sulfur content can be analyzed by high-frequency combustion and infrared detection methods, which is suitable for use in material laboratories and scientific research and testing institutions.

Carbon Sulfur Determinator Simple Maintenance

1. How to change reagent for the carbon sulphur analyzer?

Remove the reagent tube of carbon sulfur combustion analyzer, use tweezers to remove the quartz cotton plug at the port, pour out the failed reagent, insert new reagent, plug the quartz cotton plug at the port, install the reagent tube, and perform a leak check.

2. How to clean carbon sulphur analyser's quartz combustion tube？

Press the "Up/Down" button on the carbon sulfur combustion analyzer panel to lower the crucible holder, turn off the power gas source, remove the O shaped sealing ring at the lower end of the quartz combustion tube, pull out the gas path tube on the furnace head cleaning component. Loosen the two compression nuts of the furnace head cleaning component, remove the furnace head cleaning component, take out the quartz combustion tube. Immerse the quartz combustion tube in a (1:3) hydrochloric acid solution heated to 60 ℃~80 ℃, and wait for the splashes on the surface of the combustion tube to be basically removed. Remove the combustion tube of the carbon sulphur analytical instrument, rinse it with clean water, brush off residual dirt with a test tube brush, and put the combustion tube into the oven for drying. Install the combustion tube, furnace head cleaning component, and the O shaped sealing ring (inner wall of the sealing ring) at the lower end of the combustion tube. Apply a thin layer of vacuum silicone grease and perform a leak check.

About Peny

PENY Scientific Instruments（Nantong）Co., Ltd. is a company focusing on the research and development and production of gas element analysis instruments. Its predecessor, Shanghai Pinyan Optoelectronics Technology Co., Ltd., was established in 2014, and its production base moved to Nantong, Jiangsu in 2023. The factory currently covers an area of about 2100 square meters, employs more than 50 people, and its business covers more than 21 countries and regions.

We have long carried out product research and development around the detection of C, S, O, N, and H elements in metallic and non-metallic materials. Currently, our products include high-frequency infrared carbon and sulfur analyzers, oxygen, nitrogen analyzers, hydrogen analyzers, diffused hydrogen analyzers, etc.

PENY currently has a professional R & D and production team; the factory's monthly production capacity is approximately 20 - 30 element analyzers, which can arrange production tasks for different products at the same time. The instrument will be inspected and calibrated before leaving the factory to confirm that the equipment can operate normally. And our production and quality management systems have passed ISO9001 certification and have relevant qualifications for high-tech enterprises.

Pre-Sales and After-Sales Services.

We will inspect and calibrate the equipment before leaving the factory, and provide corresponding factory inspection reports, packing lists, operating instructions, calibration certificates and other documents with the equipment. We provide a 1-year warranty for the equipment that has been sold and provide 24-hour and 7-day after-sales service; when equipment use problems occur, troubleshooting can be carried out through technical support.

Peny Company Quality Control Precess

Customer Case

Wafangdian Bear Group

Wafangdian Bearing Group has a large number of bearing products with different precision levels, and it is necessary to conduct composition analysis of relevant materials during production and material testing. PENY provides carbon and sulfur analyzers during the cooperation process, and customers complete the purchase after inspecting the factory and conducting multiple tests. This equipment can be used for testing the carbon and sulfur content in ferrous metals, non-ferrous metals, rare earth, ores, ceramics and other materials, providing analytical data for material testing.

Benxi Iron and Steel Group

Benxi Iron and Steel Group involves the testing of various elements such as carbon, sulfur, oxygen, nitrogen, and hydrogen in steel production and quality control, and has high requirements for the accuracy and stability of test data. PENY provides carbon and sulfur analyzers and ONH analyzers based on its elemental testing needs. After comparing the products and testing capabilities, the customer completed the purchase, and the relevant analyzers have been used in the testing work of Benxi Iron and Steel Group.

FAQ

Q: Is your company reseller or manufacturer?

A: Our company is a professional manufacturer for 12 years, we are located in Nantong, Jiangsu province, we appreciate your visit in our factory. 

Q: Can this carbon sulfur analyzer test carbon and sulfur content in aluminium alloy?

A: Yes, our carbon sulfur analyzer can test carbon and sulfur analyzer in aluminium alloy. Our carbon sulfur analyzer can test various materials including black metals, non-ferrous metals, rare earth metals, inorganic substances, ores, and ceramics etc. 

Q: What documents and certificates do your instruments come with when they leave the factory?

A: Our instruments come with factory inspection reports, packing lists, instruction manuals, calibration certificates, and other accompanying documents when they leave the factory.

Q: What method does HUNO R1CS pack?

A: The equipment is packaged in fumigation-free wooden boxes for export. The wooden boxes have good impact resistance and are used to reduce the risk of collision and extrusion of the equipment during long-distance transportation.

Q: What method is the product transported?

A: Overseas orders are usually transported by international logistics, and corresponding transportation methods are arranged according to the destination, order quantity and customer requirements.

Q: What is the minimum MOQ?

A: The minimum order for 1 unit is suitable for single unit purchase in the laboratory, or bulk purchase can be made according to project needs.

Q: How long does the equipment delivery lead time take?

A: The delivery cycle for regular equipment is about 30 days, and the specific delivery time will be confirmed based on the order quantity, configuration and production schedule.