Product Introduction

For material laboratories that require long-term oxygen and nitrogen content testing, whether the test results can remain stable is a key consideration when purchasing oxygen and nitrogen analyzers. Especially in low-content testing, changes in environmental temperature may interfere with the thermal conductivity detection signal, causing data fluctuations and repeated testing.

The nitrogen analysis of PENY X2ON adopts thermal conductivity method, and adopts constant temperature insulation technology for the thermal conductivity detection cell to reduce the impact of environmental temperature changes on the detection process; the oxygen analysis adopts infrared method. The oxygen analysis range of the equipment is 0.0001%~20.0%, and the nitrogen analysis range is 0.0001%~30.0%. The analysis is usually completed every 3 minutes, which is suitable for daily oxygen and nitrogen testing of steel, alloys and other inorganic materials.

ON Analyzer Technical Parameters

ON Elemental Analyzer Instrument Features

1. Oxygen nitrogen elemental analyzer adopts an integrated design of the whole machine, with a high degree of automation in the analysis host and good stability in analysis accuracy, which can meet the testing needs of various materials. 

2. ON analyzer has optional built-in automatic cleaning system (software controls automatic cleaning of furnace head, automatic negative pressure dust collection).

3. Software of oxygen nitrogen analyzer is independently developed by our company, with high confidentiality level. Communication protocol can be customized according to user requirements.

4. Oxygen/nitrogen analyzer has features of integrated gas saturation detector, high sampling frequency and outstanding stability of test data.

ON Analyzer Standard Configuration

Standard Package 

Host Machine

Operation System 

Computer

Electronic Balance

Optional Package

Regulated Power Supply 

Automatic Cleaning System 

Water Cooler 

Product Application Scenarios:

· Quality inspection of steel and alloy materials

The oxygen and nitrogen content in steel, castings and alloy materials is closely related to material quality control. PENY X2ON can be used to test the oxygen and nitrogen content of raw materials, production processes and finished products, helping laboratories establish stable material testing data.

· New materials

During the research and development process of rare earth materials, superalloys, graphene, new energy materials, etc., the oxygen and nitrogen content in the materials needs to be analyzed. X2ON adopts oxygen infrared detection and nitrogen thermal conductivity detection, which can cover the range of 0.0001% to higher content. It is suitable for use in R & D laboratories and quality inspection.

· Aerospace and high-end manufacturing material testing

Metals and alloy materials used in aerospace, machinery manufacturing, automobiles, shipbuilding and other industries usually require composition control. PENY X2ON can be used for material incoming inspection, R & D analysis and production quality control.

About Peny

Since its establishment, PENY has been focusing on the research and development and production of gas element analyzers for 12 years. Its predecessor, Shanghai Pinyan Optoelectronics Technology Co., Ltd., was established in 2014 and will move its production base to Nantong Information Valley Industrial Park, Jiangsu Province in 2023. We have long carried out product research and development around the analysis of C, S, O, N, and H elements in metallic and non-metallic materials. Currently, our products cover oxygen, nitrogen and hydrogen analyzers, oxygen analyzers, hydrogen analyzers, and diffused hydrogen analyzers. and infrared carbon and sulfur analyzers, etc.

Our factory has a production area of approximately 2100 square meters, has 50+ employees, and serves customers in 21+ countries. PENY currently has the simultaneous production capacity of multiple products, and the factory's analyzer production capacity is approximately 20 - 30 units/month. Equipment will be inspected and calibrated before leaving the factory to confirm that the equipment can operate normally. For bulk procurement projects, the company arranges delivery through production planning and supply chain management.

We already have relevant quality systems and corporate qualifications.

· ISO 9001

· Relevant qualifications of  high-tech enterprises

· Registered trademark

· Professional R & D and production team

· Factory inspection and calibration process

Pre-Sales and After-Sales Services.

Before equipment procurement, PENY can assist in confirming the equipment configuration based on the customer's testing materials, testing elements, analysis scope and laboratory conditions. For customers with special use requirements, products and communication protocols can also be customized according to their needs.

Inspect and calibrate the equipment before leaving the factory, and provide corresponding factory documents with the equipment. After the equipment is sold, we provide a 1-year warranty and provide 7×24-hour after-sales response service to deal with problems that occur during the use of the equipment.

Case

Wafangdian Bear Group

Wafangdian Bearing Group has long been engaged in the manufacturing of bearings and related products, with products covering different accuracy levels and specifications. After PENY conducted technical communication with Wafangdian Bearing Group, the customer went to the factory to conduct equipment inspection and testing, and purchased PENY element analysis equipment based on actual testing needs. The equipment is used in material testing to provide testing data for element content control during the production process.

Institute of Metal Research, Chinese Academy of Sciencesbrake 

Institute of Metal Research, Chinese Academy of Sciences requires high-precision carbon sulfur and oxygen nitrogen hydrogen analysis techniques to support their research work in multiple new material research fields. After communicating and field investigation, they purchased 1 unit carbon sulfur analyzer and 1 unit OHN analyzer from our company. When we send the instruments to their insititute and after instoring and adjusting, they highly appreciated these 2 analyzers.

FAQ

Q: Can ON analyzer test the oxygen in ore?

A: Yes, our oxygen nitrogen elemental analyzer can test oxygen in ore. 

Q: What is the delivery period of your oxygen nitrogen analyzer?

A: The delivery period of our oxygen/nitrogen analyzer is 30 days. 

Q: What is your package for ON elemental analyzer?

A: Our ON analyzer will be packed in professional fumigation free export packaging wooden boxes.

Q: What freight methods do you support?

A: The standard mode of transportation is sea transportation. For export orders, PENY will choose an international logistics company to transport them and arrange specific transportation plans based on the order and destination.

Q: What is the minimum order quantity for this equipment?

A: The minimum order for 1 unit is suitable for the laboratory's first purchase, equipment updates and small-batch project purchase.

Q: Do your products come with a warranty?

A: Yes, all of our products have 1 year warranty.